DR55B01 forward and reverse motor controller module, self-locking polarity relay (6-24V)

Features:

1. This is a self-locking (bistable) polarity reversal relay. Trigger once, output polarity reverses (and holds); trigger again, output equals input (and holds). 2. Self-locking (bistable) polarity reversal controller; the module can simply control forward and reverse operation (start and stop are controlled by power-on and power-off). 3. With power indicator and polarity reversal indicator. 4. Low-pulse control mode, more convenient to use.

5. Made from high-quality electronic components, stable and reliable performance

Specifications:

Item Type: CW/CCW Controller Module Optional Input Voltage: DC 5V (5V version), DC 6-24V (12V version) Module Operating Current: Forward 2MA, Reverse 35-40MA Load Voltage: Equal to Output Voltage Load Current: Maximum. 2A (Motor with power indicator and reverse polarity indicator. Control mode: Low pulse control. Size: Approx. 43 x 21 x 16 mm / 1.7 x 0.8 x 0.6 inches. Weight: 13.5 g / 0.5 oz (approx.). Pin description: I+: Power input +; I-: Voltage input -; O+: Power output + (Output in reverse polarity is -); O-: Power output - (Output in reverse polarity is +); G: Trigger signal ground; T: Trigger signal input (low pulse of 0.2 to 2 seconds). Instructions: 1. After powering on, output = input. Press the trigger button. Output: Reverse polarity. Press the button again. Output = input. Press the trigger button a third time. Output: Reverse polarity. 2. Turn off the power and stop the output. Package list:

1 x CW/CCW Controller Module

Note:

1. For stable module operation, ensure the power supply is twice the load power. If the load is a motor, use a power supply with more than three times the load power. 2. The maximum load current is 2A. If the load is a motor, the maximum load current is 1A. 3. The module can only control forward and reverse movement (starting and stopping are controlled by powering on and off).