DR55B01 Self-locking motor reverse controller module with reverse polarity relay (6-24V)

1. This is a self-locking (bistable) reverse polarity relay. Trigger once, output reverses polarity (and holds); trigger again, output equals input (and holds). 2. Self-locking (bistable) reverse polarity controller; the module can simply control forward and reverse (start and stop are controlled by power-on and power-off). 3. With power indicator and reverse polarity indicator. 4. Low-pulse control mode, more convenient to use. 5. Made of high-quality electronic components, stable and reliable performance. Specification: Item Type: CW/CCW Controller Module. Optional Input Voltage: DC 5V (5V version), DC 6-24V (12V version). Module Operating Current: Forward 2mA, Reverse 35-40mA. Load Voltage: Equal to Output Voltage. Load Current: Maximum. 2A (Motor with power indicator and reverse polarity indicator) Control Mode: Low pulse control Size: Approx. 43 x 21 x 16 mm / 1.7 x 0.8 x 0.6 inches Weight: 13.5g / 0.5oz (approx.) Pin Description: I+: Power input +; I-: Voltage input -; O+: Power output + (output in reverse polarity is -); O-: Power output - (output in reverse polarity is +); G: Trigger signal ground; T: Trigger signal input (low pulse of 0.2 to 2 seconds). Instructions: 1. After powering on, output = input, press the trigger button, output reverses polarity, press the button again, output = input, press the trigger button a third time, output reverses polarity. And so on. 2. Turn off the power and stop the output. Package List: 1 CW/CCW Controller Module Note: 1. For stable module operation, ensure you use a power supply with twice the load power. If the load is a motor, use a power supply with more than three times the load power. 2. The maximum load current is 2A. If it is a motor, the maximum load current is 1A. 3. The module can only control forward and reverse movement (starting and stopping are controlled by powering on and off).