Drill pump for water and oil – fuel/diesel pump nozzle for electric drills – self-priming with connections – for aquariums, ponds, statues and garden fountains

Description

General Description

The electric well pump is made of ABS and an alloy, resulting in high hardness and excellent sealing. It is recommended to lubricate it with oil and rinse it with clean water before each use. To extend the service life, insert a filter into the inlet pipe when pumping abrasive media and liquids containing solids.

Technical Data

Operating temperature range: 5 to 49 degrees Celsius

Flow rate at 1500 rpm: 15 l/min

Flow rate at 3000 rpm: 30 l/min

Recommended speed: 1500 to 3500 rpm

Maximum hose length: 2.75 meters (9 feet)

Compatibility and Accessories

Can be used as a water pump

Suitable for swimming pools, aquariums, and fountains

Recommended accessory: Inlet pipe filter

Installation

Before commissioning, check that the inlet hose is leak-proof and that the pump is installed correctly. It is recommended to install a sealing ring at the connection point to prevent leaks. Also, ensure that the oil pump is vented.

Operation

This pump is powered by a drill. After starting, check within 15 to 20 seconds whether fluid is being drawn into the pump. If not, check the connection of the oil supply hose. Do not allow the pump to run dry and do not operate it in reverse.

Further Information

The pump is compact, lightweight, and easy to transport, making it ideal for use on various construction sites, thus saving you considerable time.