Drill to hand, 1,5 to 10 mm (3/8 po), in steel molded, to double gear, for plastic and wood, orange

EASY TO USE: The design to double sprocket ensures a operation flexible and flexible without blocking. Less d'efforts are required when of use. With the two sprockets, this tool features a capacity of rotation bidirectionnelle.

SECURITÉ: If the installation was correct, the chuck serait firmly attache to shaft and the jaws of precision maintiendrait firmly the bit during the operation, a safety qc is warranty.

APPLICATION LARGE: This drill to hand fits to materials various as the wood, the bamboo, the brass, l'stainless, the plastic, the PVC, gouache, the panel in fiber of glass, the circuit printed, etc.

PRATIQUE & LÉGER: When you preoccupe to qu’outside, not you inquiète not to electricity. This drill to hand no not limited. Installation of the chuck and of the mors n'implique that of the actes of torsion and of vissage, easy to use.

TAILLE APPROPRIÉ: A set of bits of different sizes (0.8-1.0-1.2-1.5-1.8-2.0-2.2-2.5-2.8-3.0mm) are included for of the needs varied.

The quality is a priority

The parts cruciales of this drill to hand are made in steel molded of high quality, this which in ensures the power.

Large Safety

The safety is also warranty by of the conceptions precise which relient respectivement the jaw and the bit, the chuck and the bit for obtain a result of accident almost nul.

Feature

- The design to two sprockets offers to our client a operation without effortlessly.

- The keys of chuck are provided for help our client to install and to adjust the drill more easily.

- A set of bits are included. A package of drill to hand meets to all your needs in material of forage.

- The handle slip has a hollow to the lining, which provides ensuite of the spaces for stored of the bits.

Note

1. Unscrew the screw to head.

2. Turn the chuck on shaft to the maximum.

3. Ouvrer the jaw of the chuck with the key of chuck donnee.

4. Screw firmly the screw to head in the hole open of the chuck.

5. Insert the bit in the jaw and use the key of chuck for close slowly the jaw to the maintain firmly.

Specification:

Size of unnecessary: 11,81 x 3,23 x 2,76 inches

Weight of unnecessary: 25,04 OZ

Material: steel molded + handle in plastic

Application: wood, bamboo, brass, aluminum, plastic, PVC, acrylic, panel in fiber of glass, circuit printed, etc.

Package contents:

1 x drill to hand

2 x chuck

2 x keys of chuck

Bits (0.8-1.0-1.2-1.5-1.8-2.0-2.2-2.5-2.8-3.0mm)