Dual power automatic transfer switch 2P – AC230V 50/60Hz – 80A – Fast synchronization controller – 35mm rail mounting

General Description

This 2P dual-power automatic transfer switch is designed to ensure a rapid transition between the main and backup power supplies, guaranteeing uninterrupted service continuity.

Made of flame-retardant PC materials, it offers excellent insulation and resistance to high temperatures.

Thanks to its silver contacts, the product's conductivity and durability are significantly improved.

It supports two operating modes: automatic and manual, and is designed for mounting on a standard 35 mm DIN rail, ideal for PZ30 distribution boxes.

Technical Specifications

Item Type: Dual-Power Automatic Transfer Switch

Material: PC, Silver

Insulation Voltage: AC690V

Rated Voltage: AC400V

Rated Operating Voltage: 230VAC

Rated Control Voltage: 220VAC 85% to 110% Us Level: PC Level

Specifications: 2P

Electrical Life: 2000 cycles

Mechanical Life: 5000 cycles

Rated Short-Circuit Current: 50kA Fuse: RT16-00-63A

Pulse withstand voltage rating: 8kV Auxiliary circuit: two relays with two sets of contacts each

Installation

The switch is designed for mounting on a standard 35 mm DIN rail, making it easy to install in distribution boxes.

Ensure that the installation conditions are met, including an altitude not exceeding 2000 meters.

Operation

To operate the switch, remove the product and follow the instructions provided in the user manual. It is essential to ensure that the ambient temperature remains between -5°C and 40°C for optimal operation. Other information: The maximum ambient temperature must not exceed 40°C, the minimum must not fall below -5°C, and the average temperature over 24 hours must not exceed 35°C. When the maximum temperature reaches 40°C, the relative humidity must not exceed 50%; at -5°C, the relative humidity may be higher. Measures must be taken to prevent condensation on the product surfaces due to temperature fluctuations.