Dual-power automatic transfer switch, 2P millisecond high-speed switching synchronization controller, AC230V 50/60Hz, PV to mains, 80A

1. SAFE AND FIRE-RETARDANT MATERIAL: This automatic transfer switch is made of excellent flame-retardant PC material, has good insulation, is resistant to high temperatures, resistant to aging, safe and reliable. The use of silver contacts can greatly improve the conductivity and lifespan of the product. 2. TWO OPERATING MODES: The power transfer switch supports automatic or manual operation, has a compact structure, reliable transmission, convenient installation and maintenance, and a long lifespan. 3. STANDARD 35MM DIN RAIL MOUNTING: The dual-power automatic switch is a miniature domestic power switch, mainly used to test if the main or backup power supply is functioning normally to ensure continuity, reliability, and safety of the power supply. Designed for DIN rail mounting, specifically for PZ30 distribution boxes. 4. MILLISE-SECOND SWITCHING WITHOUT INTERRUPTION: The automatic transfer switch is very useful; when the main power supply fails, the backup power supply operates immediately, and the power supply is switched over in milliseconds without interruption. 5. APPLICABLE SCENARIO: The power transfer switch switches to backup power in case of a power outage and to main power when power is restored. Suitable for 230V 50 or 60Hz AC backup power systems, it is widely used in various locations where a continuous power outage is not permitted, such as factories, shopping centers, nurseries, etc.

Specification:

Item Type: Automatic dual-power transfer switch. Material: PC, silver Insulation Voltage Ui: AC690V Rated Voltage Ue: AC400V Rated Operating Voltage: 230 VAC Rated Control Voltage Us: 220 VAC 85% to 110% Us Level: PC Level Specifications: 2P Lifespan: Electrical: 2000 times; Mechanical: 5000 times Rated Short Circuit Current: 50 kA Fuse: RT16-00-63A Rated Pulse Hold Voltage: 8 kV Auxiliary Circuit: Two relays, each relay has two sets of contacts Capacity: AC220V50HZle=5y Contact Time: Operating Transition Time: Return Time: Off Time:

How to use:

Take out the product and follow the operating instructions.

Package list:

1 x Dual-power automatic transfer switch 1 x User manual

Note: 1. The maximum ambient temperature must not exceed 40°C, the minimum temperature must not be below -5°C, and the average temperature over 24 hours must not exceed 35°C. 2. The altitude of the installation site must not exceed 2000 meters. 3. When the maximum temperature reaches 40°C, the relative humidity of the installation site must not exceed 50%; when the temperature is the lowest of -5°C, the relative humidity is higher, for example, if the temperature is 25°C, the relative humidity is 90%. Special measures must be taken to deal with occasional condensation on the product surfaces due to temperature changes.