E90 8-inch IPS Touchscreen CCTV Camera Tester, 4K 12MP IP Camera Tester and 8MP TVI/CVBS/AHD/CVI Coaxial Camera Tester, POE++ Max 90W, Cable Tester

POE++ with 90W Maximum Output Power and Gigabit SFP Module: The E89 professional CCTV camera tester with an 8" (1920 x 1200) touchscreen supports IEEE 802.3af/at/bt POE++ standards with up to 90W output power. It tests 4K 12MP IP cameras and CVBS analog cameras, and powers PTZ Speed Dome cameras. It supports batch activation of DH/Hik cameras, IP modification, and includes IPC Test/IP Discovery/RTSP Play/Quick OVIF/Test Tools. With its 1-channel SFP fiber optic module interface, a Gigabit SFP fiber optic module can be used for fiber optic network testing. 【4K IP and Coaxial Camera Tester】The network camera tester supports testing up to 12MP 4K IP cameras at 4000*3000P resolution. Fast automatic video viewer, IP detection, and test report creation. For Hik and DH cameras, it supports batch activation and modification of the IP address, username, and password with self-defined channel names. The built-in "Auto HD" application detects coaxial cameras up to 4K 8MP (3840 x 2160P) AHD/TVI/CVI/SDI/CVBS with UTC/PTZ control and OSD menu access. Features: Two Gigabit Ethernet ports, audio I/O input, HD/VGA input, WiFi, and DC output: 24V/2A, 12V/3A, 5V/2A. 【Cable Tester】 Cable Locator: Includes a digital cable locator assistant. Locates BNC, network, and telephone cables in tangled cables. RJ45 TDR Cable Tester: Tests the condition of cable pairs and their length (up to 180 meters), attenuation, reflectivity, impedance, and propagation delay difference. UTP Cable Tester: Tests the connection status of UTP cables and displays it on the screen. Supports fault point detection at the near, middle, and far ends of RJ45 connectors. Cable Length Test: Measures the break point (if broken) of BNC, RJ45, and RJ11 network cables. Maximum test length: 3000 meters. Short-circuit length detection is not supported. 【DMM&OPM&V-FL】Digital Multimeter – Measuring instrument for AC and DC voltage, AC and DC current, resistance, capacitance, data hold function, relative measurement, and continuity testing. Optical Power Meter: Used to measure signal power and insertion loss of various photoelectric devices and components. Visual Fault Locator: Checks for bends and breaks in the Fiber
Network Tools and WiFi and PoE Detection: Multifunction CCTV tester with two Gigabit Ethernet ports (10/100/1000 Mbps), HDMI/VGA input, audio I/O, RS485. Network tests: traceroute, link monitor, DHCP server, ping test, IP scan. 150 Mbps 2.4 GHz WiFi with analyzer for signal strength and channel analysis. PoE detection measures PSE/switch voltage and cable status. Power management: Real-time monitoring of PoE, DC12V/24V output, and DC15V input