Ecos-RSC2 433 MHz Garage Door Remote Control, Replacement Remote Control for Ecostar RSC2, RSE2, and RSZ1 Gates, Compatible with Ecostar RSC2 and RSE2 RSZ1 433 MHz Rolling Code Models - 2-Pack

General Description The Ecos-RSC2 garage door remote is a replacement remote designed to work with 433 MHz rolling code models. It offers equivalent functionality to the original remote, with a frequency of 433.92 MHz and two channels. This remote is ideal for users who want to replace their garage door remote while maintaining the same functionality. Technical Specifications Frequency: 433.92 MHz Channels: 2 Compatibility and Accessories Compatible with Ecostar models: RSC2, RSE2, RSZ1 Compatible with Lifttronic garage door openers: Lifttronic 500, Lifttronic 700, Lifttronic 800 Compatible with Porttronic models: D2500, D5000, S4000 Not compatible with the Ecostar BS series (RSC4-433-BS, RSZ1-433-BS) Not compatible with the Lifttronic 700 Series 2 and Lifttronic 800 Series 2 Installation 1 - Press the transparent programming button located under the ECOSTAR motor for 1 second. 2 - The small indicator light on the motor will flash slowly. 3 - Press button (A, B, C, or D) on your new remote control for 2 seconds. 4 - The motor indicator light will flash more rapidly. 5 - Press the same button on your new remote control for 2 seconds. 6 - The engine indicator light will flash very rapidly and then go out. Your new remote control is now programmed.