Ecos-RSC2 433Mhz Garage Door Remote Control Gate Opener Replacement for Ecostar RSC2, RSE2 RSZ1 Compatible with 433MHz Rolling Code Models ECOSTAR RSC2, RSE2 RSZ1 - 2 PACK

The Ecos-RSC2 remote control replaces the remote, not the original (with the same function as the original remote), 433.92 Mhz 2-channel. The Ecos-RSC2 garage remote control is compatible with your following models: Ecostar RSC2 Ecostar RSE2 Ecostar RSZ1 Code programming with receiver/garage door operator, Only compatible with ecostar (RSC2-433, RSE2-433, RSZ1-433), liftronic (Liftronic 500, Lifttronic 700, Lifttronic 800) and portronic (Portronic D2500, Portronic D5000, Portronic S4000) Garage door operator Not compatible with the Ecostar BS range (RSC4-433-BS, RSZ1-433-BS). Not compatible with Liftronic 700 Serie 2, Liftronic 800 Serie 2. 2-button handheld, simple programming. STANDARD PROGRAMMING: 1 - Press the transparent programming button located under the ECOSTAR motor for 1 second. The small motor indicator light flashes slowly. 2 - Press the button (A, B, C, or D) on your new remote control for 2 seconds. The indicator light on the motor flashes faster. 3 - Press the same button on your new remote control for 2 seconds. The indicator light on the motor flashes very quickly and turns off. Your new remote control is programmed.