Ecos-RSC2 433MHz garage door remote control, replacement for Ecostar RSC2, RSE2 and RSZ1. Compatible with 433MHz rolling code models. ECOSTAR RSC2, RSE2 and RSZ1 – 2-pack.

The Ecos-RSC2 remote control replaces the original remote (with the same functions), 433.92 MHz, 2 channels. The Ecos-RSC2 garage door remote control is compatible with the following models: Ecostar RSC2, Ecostar RSE2, Ecostar RSZ1. Code programming is done using the garage door receiver/operator. Compatible only with Ecostar (RSC2-433, RSE2-433, RSZ1-433), Lifttronic (Liftronic 500, Lifttronic 700, Lifttronic 800), and Portronic (Portronic D2500, Portronic D5000, Portronic S4000) garage door openers. Not compatible with the Ecostar BS series (RSC4-433-BS, RSZ1-433-BS). Not compatible with Lifttronic 700 Series 2 and Lifttronic 800 Series 2. 2-button remote control, easy programming. STANDARD PROGRAMMING: 1. Press the transparent programming button under the ECOSTAR motor for 1 second. The small light on the motor will blink slowly. 2. Press the button (A, B, C, or D) on the new remote control for 2 seconds. The engine warning light will flash faster. 3 – Press and hold the same button on your new remote control for 2 seconds. The engine warning light will flash very rapidly and then go out. Your new remote control is now programmed.