Ecos-RSC2 433MHz Garage Door Remote Control, Replacement for Ecostar RSC2, RSE2, and RSZ1. Compatible with 433MHz rolling code models. ECOSTAR RSC2, RSE2, and RSZ1 - 2-Pack

The Ecos-RSC2 remote control replaces the original remote (with the same functions as the original remote), 433.92 MHz, 2 channels.

The Ecos-RSC2 garage door remote control is compatible with the following models: Ecostar RSC2, Ecostar RSE2, Ecostar RSZ1

Code programming with garage door receiver/operator. Compatible only with Ecostar (RSC2-433, RSE2-433, RSZ1-433), Lifttronic (Liftronic 500, Lifttronic 700, Lifttronic 800), and Portronic (Portronic D2500, Portronic D5000, Portronic S4000) garage door operators.

Not compatible with the Ecostar BS range (RSC4-433-BS, RSZ1-433-BS). Not compatible with Liftronic 700 Series 2, Liftronic 800 Series 2. 2-button handheld, simple programming.

STANDARD PROGRAMMING: 1 - Press the transparent programming button located under the ECOSTAR motor for 1 second. The small indicator light on the motor will flash slowly. 2 - Press button (A, B, C, or D) on your new remote control for 2 seconds. The indicator light on the motor will flash more rapidly. 3 - Press the same button on your new remote control for 2 seconds. The indicator light on the motor will flash very rapidly and then turn off. Your new remote control is programmed.