EcosRSC433 433MHz Garage Door Remote Control, Replacement for Ecostar AGS RCS433, Compatible with 433MHz Rolling Code Models - 2-Pack

The EcosRSC433 remote control is a replacement for the original remote control (with the same functions as the original remote). It operates at 433.92 MHz and has 2 channels. The EcosRSC433 garage door remote control is compatible with the following models: Ecostar AGS RCS433. Programming is done via code with a receiver/garage door operator. It is only compatible with Ecostar, Lifttronic (Liftronic 500, Lifttronic 700, Lifttronic 800) and Portronic (Portronic D2500, Portronic D5000, Portronic S4000) garage door operators. It is not compatible with the Ecostar BS range (-433-BS, -433-BS). Not compatible with Liftronic 700 Series 2 or Liftronic 800 Series 2. 2-button handheld remote, simple programming. STANDARD PROGRAMMING: 1 - Press the transparent programming button located under the ECOSTAR motor for 1 second. The small indicator light on the motor will flash slowly. 2 - Press and hold button (A, B, C, or D) on your new remote for 2 seconds. The indicator light on the motor will flash more rapidly. 3 - Press and hold the same button on your new remote for 2 seconds. The indicator light on the motor will flash very rapidly and then turn off. Your new remote is now programmed.