EcosRSC433 433MHz Garage Remote Control - Replacement Gate Remote for Ecostar AGS RCS433 - Compatible with 433MHz Rolling Code Models - 2-Pack

The EcosRSC433 remote control is a replacement for the original remote (with the same functions as the original remote), 433.92 MHz, 2 channels. ehtgWOlL7EpgN1l3btJa2Q-SNYIzTNJD_a8fjtOtojtIENGblRdwTa7xM7tQB4m3qgE5WZQyhxB0FwBS2WcgtxwA 44QdVdHv65Q747R0sakjafOZ_-JLBxmtL-KWLLdANm-d9_UEoXjT-6SXzffhc3z6xfFhKV4_4u_mmyOx23TTZQ==" alt="" width="800" height="800" data-orig-src="https://cdn.manomano.com/external-resources/AAHKMJXYDAFdJAOAIMEbOAchvAn2Ov5enmbCm3B-wfvLxROjIZmx9HYnazoJeevh87k9qt6gfy9XUXTardZioEZ2_n8x6zdYyuw5RsAWPUCmXY534U3Lx1e9uTClX4c-tSYgKikwfBDrRckQ5tyMI234" />

The EcosRSC433 garage door remote control is compatible with the following models: Ecostar AGS RCS433

Code programming with garage door receiver/operator. Compatible only with Ecostar and Lifttronic (Liftronic 500, Lifttronic 700, Lifttronic)

800) and portronic (Portronic D2500, Portronic D5000, Portronic S4000) Garage door operator

Not compatible with the Ecostar BS range (-433-BS, -433-BS). Not compatible with Liftronic 700 Series 2, Liftronic 800 Series 2. 2-button handheld, simple programming.

STANDARD PROGRAMMING: 1 - Press the transparent programming button located under the ECOSTAR motor for 1 second. The small indicator light on the motor will flash slowly. 2 - Press and hold button (A, B, C, or D) on your new remote control for 2 seconds. The indicator light on the motor will flash more rapidly. 3 - Press and hold the same button on your new remote control for 2 seconds. The indicator light on the motor will flash very rapidly and then turn off. Your new remote control is now programmed.