1/5
EIM PLUS 12V 630-465 Motor Speed Controller Module for Motor Control Panel
Buying for your business?
Negotiated prices excl. VAT up to -20%
Sold by Qiudie-homelavafans
You may also like
Compare with similar items
Product information
Description
Features:1.Engine Controller: The engine interface module is a sealed, engine-mounted module that provides switching relays for the starter solenoids, glow plugs, and fuel solenoids.
2.High Operational Safety: Each interface of these circuits is protected by a separate fuse installed in the module to ensure safety during operation.
3.Overspeed Signal: The ElM Plus monitors the speed signal from the magnetic sensor.If the engine speed exceeds a preset value, the module sends a 0-volt signal to the generator control panel to activate the overspeed fault circuit.
4. Good ABS material: Primarily made from high-quality ABS material, the EIM control board is unlikely to malfunction and is very durable for extended use.
5.Easy to install: The lightweight and compact EIM controller allows for convenient installation, which can be completed quickly in minutes.
Specifications:Item Type: Engine Interface Module
Model: EIM Plus 859767
Material: ABS
Product Voltage: 12V
Product Features: The engine interface module is a sealed module installed on the engine, which provides switching relays for the starter solenoid valve, the ignition cap, and the fuel solenoid.Each of these circuits is protected by a separate fuse installed in the module.When each circuit is powered, a single LED illuminates.
EIM Plus: The EIM Plus is used with a control panel that is not equipped with an overspeed protection system.
Overspeed signal: The ELM Plus monitors the speed signal from the magnetic sensor.If the motor speed exceeds a predefined value, the module sends a 0-volt signal to the generator's control panel to activate the overspeed fault circuit.The overspeed setpoints are default-set to 55 Hz for 50 Hz units and 66 Hz for 60 Hz units.This can be adjusted using the setting screw accessible through the hole next to the overspeed setting LED.When the motor is running at its rated speed, 1500 RPM at 50 Hz and 1800 RPM at 60 Hz, adjust the setting screw until the overspeed setting LED turns off.This sets the overspeed value to 10% above the generator's overall operating speed.
How to use:Direct installation and use.
Package list:1 XEngine interface module
2.High Operational Safety: Each interface of these circuits is protected by a separate fuse installed in the module to ensure safety during operation.
3.Overspeed Signal: The ElM Plus monitors the speed signal from the magnetic sensor.If the engine speed exceeds a preset value, the module sends a 0-volt signal to the generator control panel to activate the overspeed fault circuit.
4. Good ABS material: Primarily made from high-quality ABS material, the EIM control board is unlikely to malfunction and is very durable for extended use.
5.Easy to install: The lightweight and compact EIM controller allows for convenient installation, which can be completed quickly in minutes.
Specifications:Item Type: Engine Interface Module
Model: EIM Plus 859767
Material: ABS
Product Voltage: 12V
Product Features: The engine interface module is a sealed module installed on the engine, which provides switching relays for the starter solenoid valve, the ignition cap, and the fuel solenoid.Each of these circuits is protected by a separate fuse installed in the module.When each circuit is powered, a single LED illuminates.
EIM Plus: The EIM Plus is used with a control panel that is not equipped with an overspeed protection system.
Overspeed signal: The ELM Plus monitors the speed signal from the magnetic sensor.If the motor speed exceeds a predefined value, the module sends a 0-volt signal to the generator's control panel to activate the overspeed fault circuit.The overspeed setpoints are default-set to 55 Hz for 50 Hz units and 66 Hz for 60 Hz units.This can be adjusted using the setting screw accessible through the hole next to the overspeed setting LED.When the motor is running at its rated speed, 1500 RPM at 50 Hz and 1800 RPM at 60 Hz, adjust the setting screw until the overspeed setting LED turns off.This sets the overspeed value to 10% above the generator's overall operating speed.
How to use:Direct installation and use.
Package list:1 XEngine interface module
Features
- BrandOTHERS
- Pcs per pack1
- Voltage12 V
- ManoMano ReferenceME242428516
- MMID512919151743
- Product codeQD-GB26Y61677
- EAN5008500116677
You are here:
'/%3E%3C/svg%3E){kind=small}