Electric bike charger – 42V 2A – 6 connectors – 36V replacement – Hoverboard – Accessory

Product Description: Please carefully check your model, battery, and plug size before ordering. Suitable for various types of 36V, 42V, and 2A batteries. Note: Suitable for 36V lithium battery voltage and 42V charger voltage. (Other voltages cannot be used.) Suitable battery voltage: 36V. Output voltage: 42V. Output current: 2A. Output power: 84W. 6 Multifunctional Interfaces: This charger is suitable for most 42V 2A lithium batteries (compatible with 36V Li-ion batteries and most 42V devices) and comes with 6 types of plugs: DC 5.5 x 2.5mm/DC 5.5 x 2.1mm, 8mm 3-pin connector, 12mm 3-pin connector, 8mm RCA connector, and 3-pin XLR male and 3P plug. Suitable for various types of scooters, including the Xiaomi M365, electric racing scooters, two-wheeled racing scooters, drift boards, unicycles, electric bicycles, etc. The single-pin connector is only suitable for 36V batteries and is not compatible with batteries of other voltages. Batteries with other voltages will light up green but will not charge. Please carefully check the size and connector of your original charger before ordering. Multiple Protections: The lithium charger features an aluminum heat sink, and its efficient heat dissipation design effectively dissipates heat to deliver power. Overvoltage protection, overheat protection, over-discharge protection, and over-cycle protection ensure a safe and convenient charging experience. Charging Indicator: The 42V 2A electric scooter charger has an LED charging indicator. The red light illuminates while charging, and the green light illuminates when the battery is fully charged. Charging stops automatically when the battery is full. A red indicator light shows that the battery is charging; a green indicator light shows that the battery is fully charged, disconnected, or not charging. It automatically shuts off at the end of the charging cycle to prevent overcharging. High-quality materials: The charger is made of heat-resistant ABS + PC plastic structural material, which is durable, difficult to damage, and has a long service life. It features a pure copper fiber core for faster charging and an improved aluminum alloy connector with a robust structure that effectively prevents oxidation and rust. Scope of application: Due to its various connection interfaces, the Balance Car Charger is suitable for different types of scooters, such as electric scooters, electric bicycles, balance cars, Xiaomi M365 and two-wheeled balance cars, hoverboards, mobility scooters, etc. (Please confirm your model, size, specifications, parameters, etc. with our products before purchasing.) Precautions for use: 1. If the charger is plugged into the mains (and not the scale), the red indicator light will immediately illuminate, and the charger is defective. 2. Do not cover the charger. 3. Do not use for more than 5 hours per charge. 4. Only the green light is displayed. The vehicle has not been used for a long time, and therefore the battery is not properly charged. Take the vehicle to an electric vehicle workshop for activation. 5. The charging indicator light flashes twice: if the situation does not improve, wait 30 minutes. Also check if the battery has been left open too long or if the polymer has deteriorated and is therefore not charging properly. Package includes: 1 x Electric Scooter Charger, 6 x Types of Plugs. Compatibility: The electric scooter charger is fully compatible with electric scooters, DC electric scooters, electric scooters, units, scooters, and balance scooters, meeting all your needs at once. The hoverboard charger is lightweight, small, stable, efficient, and safe. Caution: Do not use this adapter to charge low-quality batteries. Immediately disconnect the power if the battery becomes too hot or cannot be charged.