1/5

Electric Cutter Styrofoam Cutter Hot Wire Foam Cutter Cutting Machine Electric Table Tool Adjustable Temperature 0-500°C Portable Wire Foam Cutting Machine for Precise Styrofoam Sculpting and Crafting

~~£79.99~~

£1Offered

To be applied on the payment page

Offer valid today only.

Sold by DENCRESTUK

Product information

Description

General description

This practical foam cutting machine allows for fast and precise cutting of foam, saving you time and effort. It is suitable for school projects, artists, and factories to create billboards, crafts, and molds, making it an ideal choice for unleashing your creativity.

Technical specifications

Material: Multi-layer Panel and Stainless Steel

Color: Light Blue, Silver

Input Voltage: 100-240V AC

Output Voltage: 18V/4A DC

Power: 72W

Plug: UK Standard

Adjustable Temperature Range: 0-500°C/0-932°F

Cutting Height: 0-25cm/0-9.84in

Heating Wire Diameter: 0.28mm/0.01in

Cutting Width: 0-28cm/0-11.02in

Worktable Width: 33cm/12.99in

Workbench Length: 39cm/15.35in

Packing Size: 44*38*10cm/17.32*14.96*3.93in

Gross Weight: 3.5kg/7.7lbs

Net Weight: 3kg/6.6lbs

Installation

Take out the semicircular angle board, align two holes on the angle board with two holes on the worktable, and tighten them with screws.

Take out the L-type stainless steel square pipe support, align two holes on the pillar with two holes on the angle board, put on the bolt, cover the copper nose, and tighten the nut.

Pull out the heating wire about 30cm/11.81in from the wire wheel.

Thread the heating wire through the small hole of the worktable, make a ring on the heating wire, and hang it on the spring at the machine's bottom.

Rotate the aluminum alloy wire wheel on the bracket to tighten the heating wire.

Usage

The foam cutting machine is used to cut foam, sponge, pearl cotton, and other hot-melt materials with a melting point below 350°C. It can cut various shapes including angles, cylinders, sharp cones, rings, tapers, and straight lines.

Other information

Package includes: 1 Worktable, 1 L-shape Conductive support, 1 Guiding Rule, 1 Circular Die, 1 Angle Board, 1 Adapter, 1 English Manual.

Notes: Read the manual completely before installation and use, paying attention to safety instructions. Do not touch the heating wire when the power is on, and maintain a safe distance from it. Use gloves if necessary to avoid scalding. Ensure the heating wire does not glow too red to prevent breakage. Use in a ventilated environment and supervise children during use. Turn off the power when not in use to avoid damage.

Features

Brand
CNCEST
Length
39 cm
Width
33 cm
Height
25 cm
Weight
3000 g

You are here: