Electric Engraving Pen, Adjustable Speed ​​Electric Engraver, Metal Engraving Pen, Jewelry Making Tool EU 220V, for Metals, Porcelain, Glass, Plastic 21cm

It is equipped with speed control and a pen-shaped handle to make creating ideas easier. It is suitable for engraving on metal, wood, glue, porcelain, glass and leather.

Electric engraving pen, cutting plotter, marking pen, engraving machine Electric engraving pen and engraving pen have the characteristics of small size, light weight, easy engraving, fast speed, easy to carry, easy to operate and permanent mark retention. It is widely used to engrave on the surface of almost all materials such as metal, jade, glass, plastic, marble, wood, etc.

Voltage range: 220 V

Five-speed adjustment! Arbitrary permanent pattern text; with large concave depth, the deepest can reach 1mm depending on the hardness of the material.

This electric engraving pen engraving instrument has a small and exquisite design, is light in weight, easy to carry, and quick and convenient to use. It is deeply loved by consumers. This instrument provides a quick and easy way to retain marks on materials.

The principle of electric engraving pen: It uses the periodic frequency characteristics of alternating current to produce forced vibrations (up and down vibration) to operate the pen tip. Therefore, an acceptable volume will be produced during the working process (engraving pens based on this principle have volume), so those who are allergic to sound should be careful Shoot~!

How to use the electric engraving pen: When using it, hold the body with your hand, tilt it slightly at an angle (about 45 degrees) like a pen for writing, and place your hand on the table. Do not press too hard when writing, because writing is easier than usual Slightly slower Move the engraving to the physical object. Wherever he goes, he leaves traces. According to different materials, adjust the gear appropriately. Master its performance through repeated engraving to meet font size and depth requirements for engraving different materials.

Product introduction: The electric engraving machine is a new engraving instrument. The product is small and exquisite in design, light in weight, easy to carry, and quick and convenient to use. It is deeply loved by consumers. Not only can it play a role as a classification mark in scientific research and industrial production, but it is also widely used in commercial and household fields. In craft production, the engraver also has its unique uses. This instrument provides the quickest and easiest way to permanently preserve marks on materials and can engrave letters and designs on almost any material such as metal, ceramic and wood.

Mechanical principle: use the periodic characteristics of alternating frequency to generate forced vibrations (up and down vibrations) to drive the pen head to work. Therefore, there will be a certain tolerable volume during the work process (letter pens with this principle have a certain volume), so those who are allergic to sound should be careful.

How to use: Tilt slightly at an angle (about 45 degrees) as if holding a pen to write and place your hand on the table. Do not press too hard when writing, and the writing speed is slightly slower than usual. can be adjusted by adjusting the gear position. Master its performance through repeated engraving several times to meet the font size and depth requirements for engraving different materials.

Note: Continuous work should not exceed 20 minutes, so as not to damage the coil, intermittent use can guarantee the life of the body, when the case is hot, it should be cooled down before use, please turn off the power when not in it. use!

Note: The data is manual measurement, please allow 1-3cm error, due to the differences between light and screen, there will be a certain color difference, the specific received in kind shall prevail.

-Contact our customer service in case you need further assistance