Electricity meter, small-capacity electronic kWh meter for electrical workers and electricians

Features:1.The meter fully complies with the relevant technical requirements of the national standard GB/T17215.321-2008 and the international standard IEC62053 for single-phase energy meters of grade 1 or level 2, and can measure directly and accurately.
2.The LCD screen displays the total energy consumption in 7+1 or 6+1 meter increments.
3.It features high reliability, small size, light weight, attractive appearance, advanced technology, and standard 35mm DIN rail mounting.
4.It has good electromagnetic interference protection, low power consumption, high accuracy, high overload capacity, high stability, anti-theft protection, and a long service life.
5.This table is suitable for measuring the rated frequency of single-phase ac active electricity of 50Hz or 60Hz, used for fixed installation indoors, applies to the ambient temperature is -25℃~55℃, the relative humidity is ≤95%, and in the air does not not

Specifications:

Descriptions:
The meter fully complies with the relevant technical requirements of national standard GB/T17215.321-2008 and international standard IEC62053 of grade 1 or level 2 single-phase energy meter, which can directly and accurately measure active energy. energy from energy consumption. It features high reliability, small volume, light weight, beautiful appearance, advanced technology and DIN 35mm standard guide rail installation, etc.
Features:
The meter fully complies with the relevant technical requirements of GB/T17215.Compliant with National Standard 321-2008 and International Standard IEC62053 for single-phase energy meters of grade 1 or level 2, this meter can directly and accurately measure active energy consumption.The 7+1 or 6+1 meter LCD screen displays the total energy consumption.
It features high reliability, small size, light weight, attractive appearance, advanced technology, and standard 35mm DIN rail mounting.
It offers good electromagnetic interference protection, low power consumption, high accuracy, high overload capacity, high stability, anti-theft protection, and a long service life.Installation of the electricity meter requires a qualified electrician or experienced professionals.The electricity meter must be installed in a ventilated and dry indoor location, using a standard DIN 35 mm guide rail installation. The bottom plate of the electricity meter must be fixed to a rigid, non-vibrating refractory wall.
3. The bottom plate of the electricity meter must be fixed to a rigid, non-vibrating refractory wall.
4.Electricity meters must be installed in protective cabinets in locations where dirt and potential damage may occur.
5.The installation must comply with the wiring diagram, preferably using multi-strand copper wire, to avoid malfunctions or combustion of the electricity meter due to poor contact.
6.When the electricity meter is correctly connected to the electrical network, the meter's power indicator light will illuminate.
7.The electricity meter must take lightning protection measures when used in areas with high lightning activity to prevent damage from lightning strikes.
The electricity meter's load capacity is 0.05 lb ~ Imax (direct access).
Power indication: When the green indicator light is on, it indicates that the power supply is functioning normally.
Pulse indication: When the red indicator light is on, it indicates that a power pulse is detected.
When a sampling signal is present, the pulse duration is approximately 80 ms.
Package includes:
1 x DIN rail energy meter