Electronic energy meter, digital LCD kWh, 220V single-phase, DIN rail, 5-30A

Key Features: 1. The meter fully complies with the relevant technical requirements of the national standard GB/T17215.321-2008 and the international standard IEC62053 for single-phase energy meters of grade 1 or level 2, and can directly and accurately measure active energy. 2. The 7-inch or 6-inch LCD screen displays the total power consumption. 3. It features high reliability, small size, light weight, attractive appearance, advanced technology, and installation on a standard 35mm DIN rail. 4. It offers good electromagnetic interference protection, low power consumption, high accuracy, high overload capacity, high stability, anti-theft protection, and a long service life. 5. This meter is suitable for measuring single-phase AC active electricity at a nominal frequency of 50 Hz or 60 Hz, for fixed indoor installation, and is applicable in ambient temperatures from -25°C to 55°C, relative humidity ≤ 95%, and in non-aerated air. Specifications: Descriptions: The meter fully complies with the relevant technical requirements of the national standard GB/T17215.321-2008 and the international standard IEC62053 for single-phase energy meters of level 1 or 2, which can directly and accurately measure energy consumption. It features high reliability, small size, light weight, attractive appearance, advanced technology, and installation on a standard 35 mm DIN rail, etc. - Compliant with the 2008 national standard and the international IEC62053 standard for single-phase energy meters of grade 1 or level 2, this meter can directly and accurately measure active energy consumption. The LCD screen measures 7 x 1 or 6 x 1 meters and displays the total energy consumption. It features high reliability, a small size, light weight, an attractive appearance, advanced technology, and installation on a standard 35mm DIN rail. It also boasts good electromagnetic interference immunity, low power consumption, high accuracy, high overload capacity, high stability, anti-theft protection, and a long service life. This table is suitable for measuring the nominal frequency of 50 Hz or 60 Hz of single-phase AC active electricity, used for fixed indoor installation, applicable to ambient temperature of -25 ℃ ~ 55 ℃, relative humidity ≤ 95%, and in the air does not contain corrosive gases and avoids dust, mold, salt mist, condensation, insects, etc. Specifications: Model: DDS5188 Number of phases: Single-phase Type: Guide type Display mode: LCD Rated voltage: 220 V Rated current: 5 (30) A Operating temperature: -25 ℃ ~ 55 ℃ Rated frequency: 50-60 Hz -/- 10% Accuracy level: Level 1 (equivalent to a measurement error < 1%) Including port S0 2000Imp/kWh (ti = 80ms) Relative humidity: 95% Dimensions: Approx. 9.6 x 6.3 x 1.7 cm / 3.7 x 2.4 x 0.6 in Weight: 97 g Wiring diagram: Package contents: 1 x DIN rail energy meter (other items in the image are not included)