Electronic pool water quality tester for pH and chlorine levels, 13 cm cable

General Description The PC102 pool water quality tester is an electronic tool designed to measure the pH and chlorine levels of your pool or spa water. It allows you to quickly and easily test whether chlorine and pH levels are within the ideal ranges, without resorting to complicated traditional methods. After initial calibration, it is ready to use to ensure clean and balanced pool water. Technical Specifications Dimensions: 190 x 120 mm Probe length with handle: 150 mm Probe length (only): 48 mm Cable length: 130 mm Power supply: 1 x 1.5V AA alkaline battery Weight: 160 g (without battery) Recommended chlorine level: 1.2 to 1.7 ppm Recommended pH level: 7.2 to 7.8 Instructions for Use To use the tester, prepare a 1.5 ppm chlorine solution. Then test the chlorine and pH levels of your pool. If the results exceed the recommended ranges, the tester will provide helpful guidance for adjusting chlorine, acid, and alkali levels. Other information: One set contains: 1 pH tester, 1 Cl2 tester, 1 probe, 1 manual