Electronic pool water quality tester for pH and chlorine levels, 13 cm cable

PC102 Pool Water Quality Tester

1. You need to prepare a chlorine solution at 1.5 ppm; the purpose of the test is to inspect your pool water.

2. If your chlorine level is 1.5 ppm or not (you don't know if it is or can't find the calibration point), please use a traditional test strip.

3. Once you are satisfied with your calibration, you do not need to recalibrate unless you change the pool to use different pool water.

A brief description:

The Risepro tester is designed for family-sized pools or spas (excluding saltwater pools, industrial, or scientific use). After the first successful calibration, you can test the chlorine and acid-base levels of your pool water quickly and easily.

Therefore, there's no need for complicated and messy "traditional combinations of liquid chlorine and acid-base"! With this handy tester, you can quickly check if your chlorine and pH levels are within the ideal range of 7.8: chlorine 1.2-1.7 ppm and pH 7.2. If your test results are outside this range, you'll have useful information and a suitable pool treatment that's compatible with chlorine, acid, and alkali. This is certainly an excellent tool that you might need to maintain your pool water.

Specification:

The recommended chlorine level for pools and spas is 1.2 to 1.7 ppm

The recommended pH level for pools and spas is 7.2 to 7.8

Size (CM):

Host: 190 x 120 mm

Probe with handle: 150 mm long

Probe (only): 48 mm long (black strap not included)

Cable (only): 130 mm long

Power supply: 1 x 1.5V AA alkaline battery

Weight: 160 g (without battery)

One set contains:

1 x pH value, Cl2 tester, probe