Electronic ruler for KTC-300 injection moulding machine, load cell, general-purpose linear displacement sensor, resistance ruler for die-casting machine

Features

• 1. High compatibility, potentiometer principle, input voltage from 0 to 100% (varies depending on the setting).
• 2. Plug-type connector, practical and functional, silent output, smooth stem.
• 3. Oxidation-resistant Hessman connector, carefully crafted.
• 4. Reduced signal loss, high-definition sound quality, compatible with all devices.
• 5. Highest IP67 protection rating, excellent protection.

Specifications

Item Type: Displacement Sensor

Material: Stainless Steel

Electrical Travel: Range + 3 mm

Resolution: Continuous and Infinite Analysis

Repeatability: 0.01 mm

Normal Operating Current of Sliding Brush: ≤ 10 μA

Maximum Current of Sliding Brush in Case of Fault: 10 mA

Insulation Resistance (500 VDC, 50 Hz): ≥ 10 MΩ

Insulation Strength (500 VAC, 50 Hz): ≤ 100 μA

Shell length (A): Range + 78.5 mm

Mechanical stroke (B): Range + 8 mm

Maximum pull rod load: 50 kg

Working force:

Horizontal direction < 10 N

Vertical direction ≤ 10 N

Vibration resistance (standard): 5 ... 2000 Hz, Amax = 0.8 mm, amax = 20 g

Standard shock resistance: 50 g, 11 ms

Operating temperature range: -60 to +150 °C

Service life: > 100 × 10^6 times

Maximum operating speed: 10 m/s, maximum acceleration: 10 m/s²

Protection rating: IP67 (DIN40500 / IEC529)

Contents:

1 displacement sensor

1 plug

3 accessories

4 screws