Electrostatic elimination bar, high-efficiency ionising air bar, wear-resistant for thin-film composite, for 5.6 kV output power device (300 mm).

1. High efficiency: The operating pressure of the ionizing air rod is 0.4 MPa-0.8 MPa, with a fast static removal rate, suitable for power supplies with a 5.6 kV output. 2. Good performance: The ion discharge needles are densely arranged, resulting in a high ion release density, better electrostatic removal, and less wear. 3. Applicable range: This ionizing air rod is suitable for removing static electricity from thin films, wide sheet workpieces, and large work areas. 4. Stainless steel ion needle: The ion needle is made of excellent quality stainless steel, resistant to corrosion and oxidation, and can be used in various environments. 5. Applicable fields: This static removal rod is widely used in industries such as electronic assembly, bioproducts, composite films, injection molding, printing, etc. Features: Item type: Ionizing air bar. Material: Steel, copper. Static removal speed: 0.5 s. Ion balance: ≤ 35 V. Operating environment: Dust, general workshop, temperature: 10-50 ℃, humidity: Operating air pressure: 0.4 MPa-0.8 MPa (4-8 kg recommended). Contents: Instructions for use: 1. Connect the applicable ionizing air bar to the power supply's output port; one or two bars can be connected. 2. Connect the power cord to the machine and plug it into the power supply. 3. Turn on the switch to operate. Package contents: 1 x Ionizing air bar.