Electrostatic elimination bar, high efficiency ionizing air bar wear resistance for thin film composite for 5.6 KV output power device (300 mm).

1. High efficiency: The operating pressure of the ionizing air rod is 0.4 MPa-0.8 MPa, with a fast static removal rate, suitable for power supplies with a 5.6 kV output. 2. Good performance: The ion discharge needles are densely arranged, with a high ion release density, better electrostatic removal effect, and less wear. 3. Applicable range: This ionizing air rod is suitable for removing static electricity from thin films, wide sheet workpieces, and large work areas. 4. Stainless steel ion needle: The ion needle is made of excellent quality stainless steel, resistant to corrosion and oxidation, and can be used in various environments. 5. Applicable fields: This static elimination rod is widely used in industries such as electronic assembly, biological products, composite films, injection molding, printing, etc. Specifications: Item type: Ionizing air rod. Material: Steel, copper. Static elimination speed: 0.5 s. Ion balance: ≤ 35 V. Operating environment: Dust, general workshop, temperature: 10-50 ℃, humidity: Operating air pressure: 0.4 MPa-0.8 MPa (4-8 kg recommended). Contents: Instructions for use: 1. Connect the applicable ionizing rod to the power supply's output port; one or two rods can be connected. 2. Connect the power cord to the machine and plug it into the power supply. 3. Turn on the switch to use it. Contents: 1 ionizing air bar.