Electrostatic privacy mirror film 40×200 cm – Two-tone silver and black – UV and heat resistant – Privacy protection for windows

【Ingenious Two-Tone Mirror Film】This privacy window film has one silver side and one black side, creating a mirror effect on both sides. It can be applied to the inside or outside of windows (depending on the desired effect, the choice is yours). Please note the difference in effect (see the image in the description). For maximum privacy, we recommend exterior application. 【Mirror Effect and Privacy Protection】The privacy and mirror effect of this film depend on the light intensity (obtained from the side of the window that receives the most light). During the day, it provides a good mirror effect from the outside, preventing prying eyes from intruding on your privacy. In the evening, if the lights are on, the mirror effect is on the inside, allowing people outside to see inside. WARNING: Don't forget to close the curtain at night. 【UV Protection and Heat Reduction】This heat-blocking film provides privacy and blocks 95% of UV rays, reducing sunlight in the room and thus lowering heat (you won't feel like you're burning in the sun), and keeping your home a little cooler. PLEASE NOTE: The reduction in brightness in your room is significant (light is reduced by more than 50%), with less glare, but you also gain privacy. 【No Adhesive】This privacy window film is made of high-quality materials. It's important to note that this is an electrostatic film, not a glued film. It has no adhesive, making it repositionable, removable, and reusable. This heat-blocking film is more securely mounted, easy to remove, and leaves no residue. 【Easy to Install】This mirror window film is very easy to install (with the installation tutorials). Note: 1. To separate the protective film from the privacy film, otherwise the one-way mirror won't stick to the glass, use the small stickers provided (or tape). 2. Use plenty of water, because the more you use, the easier it is to smooth out any bubbles that form when applying the film using a spatula or a plastic card. The bubbles will disappear over time.