Engraver and Precision Tool, Pyrography Set, 54-Piece, Wood Pyrography, 60 W, Temperature Adjustable from 200 to 450 °C - for Wood, Leather, Sculpture, Wood Pyrography, DIY

Product Description Wood burning kit, wood burning tool with soldering iron for all the needs of pyrographers, hobbyists, craftsmen, and fine artists. Nice starter kit for wood burning, leatherwork, soldering, stamping, papercraft, hot knife cutting, pattern transferring, embossing, stencil cutting, calligraphy, personalizing, and so on. Product Specifications Material: Plastic + Brass + Steel Input Power: AC110V, 50-60Hz Wattage: 15-60W Operating Temperature: 0-40°C Temperature Range: 200°C-450°C (392°F-842°F) Usage 1. Choose a tip you like and install it on the Device 2. Plug the device into a 110V outlet 3. Wait 3-5 minutes for it to heat up 4. Start drawing on the wood surface 5. Many different patterns can be created with the included tips and stencils [Package Includes]: 1 x Pyrography Pen 25 x Pyrography and Soldering Tips 5 x Iron Heads 1 x Replacement Head for Pyrography Converter 1 x Mini Stand, 1 x Soldering Sucker 1 x Soldering Wire 2 x Stencils (Letters + Numbers + Basic Symbol Set) 1 x Leather Carrying Case Tips 1. It is recommended to use the pen in a well-ventilated room. 2. Please wear work gloves when replacing the tips. 3. The metal tips become brittle and break easily at high temperatures. Wait until the temperature drops and then replace them. 4. Remember to turn off the switch or unplug the soldering iron when resting or finishing work. 5. Do not get the soldering iron wet during use or touch it with wet hands. 6. If the soldering iron head is blackened, first clean it with emery, then turn on the power to heat it, and then immediately apply solder. This method can remove the oxide.