Eosnow XH-W3005 Digital Hygrometer Controller Humidity Sensor 0-99% RH 12V

General Description

The XH-W3005 digital humidity sensor is a high-quality humidity controller designed for long-lasting use.It offers a wide humidity measurement range from 0% to 99% RH, with a measurement accuracy of 0.1%. Its simple panel, equipped with two buttons, allows for easy and intuitive adjustment.

Technical Specifications

• Model: XH-W3005
• Weight: 68 g
• Input Voltage: 12 V, 24 V, 220 V (optional)
• Humidity Range: 0% ~ 99% RH
• Humidity Control Accuracy: 0.1% RH
• Load Power: 120 W/240 W/1500 W
• Output Type: Direct Output
• Mounting Hole Spacing: 73 mm
• Size: 60 x 45 x 31 mm

Usage

To use the controller, connect it to the circuit power supply.The digital tube will display the current starting temperature of the humidity setting.To set the starting humidity, press and hold the "up" button for approximately 3 seconds until the humidity number flashes. You can then adjust this number using the up and down buttons.To set the stopping humidity, press and hold the "down" button for approximately 3 seconds to stop the number from flashing.To restore factory settings, press and hold both the up and down buttons simultaneously while the device is powered on.

Other Information

• Package List: 1 x Digital Humidity Controller
• Note: Do not power on if the output is not properly connected to avoid unnecessary problems.