Luxora Venisymlis Intense Pulsed Light Hair Removal Device (600,000 flashes - permanent hair removal - pulsed light - painless) - AquaForge

Features 1. Five adjustable light intensity levels to suit different skin types. Suitable for hair removal on legs, arms, underarms, bikini line, chest, back, chin, etc. 2. Intense Pulsed Light (IPL) technology for effective, gentle, and painless hair removal. Up to 300,000 flashes. 3. High-quality quartz laser head, seamless design, and meticulous workmanship for a perfect seal, safe, and reliable use. Functions: Single flash / Continuous flash (2 flash modes) New and improved version: 300,000 flashes/pulse. Small, stylish, and portable. Safe, with no side effects, and painless. Moderate inhibition of hair regrowth. Suitable for use on underarms, bikini line, face, beard, arms, legs, and intimate areas. Adjustable intensity from 1 to 5 levels. Improved built-in UV filter for optimal skin protection. Enhanced integrated eye protection system to prevent accidental eye damage. For skin contact use only. Usable worldwide, this device is compatible with all voltages thanks to its country-specific plugs. Long power cord. Specifications: Material: ABS; Housing Color: White/Rose Gold (optional); Light Intensity: 5 levels; Light Intensity: 3-5 J/cm²; Wavelength: 470-1100 nm; Number of Pulses: 300,000; Power: 30 W; Input Voltage: 100-240 V AC; Output Frequency: 50/60 Hz; Output Voltage: 12 V 2.5 A; Temperature Range: 5-35 °C; Dimensions: 12.4 × 8.3 × 4.85 cm. Intense Pulsed Light (IPL) technology for effective, gentle, and painless hair removal, up to 300,000 pulses. Instructions for use: Step 1: Shave the area to be treated and dry the skin. Use a wipe soaked in rubbing alcohol to clean the flash window. Step 2: Plug in the device. The flashing green light indicates that it is in standby mode. Step 3: Press the "ON/OFF" button to turn on the device. Once on, press this button again to adjust the intensity. The device offers 5 intensity levels, from 1 to 5. (The blue intensity light is on.) Step 4: Place the flash window vertically and firmly over the area to be treated, then press the flash button. Frequency of use: One hair removal cycle consists of 6 to 12 sessions. 1. Use the device once every two weeks, from the first to the sixth session. 2. Use the device once every four weeks after the sixth session. 3. If you notice regrowth after 6 to 12 sessions, you can switch to a maintenance treatment. For example, every two or three months, depending on your rate of regrowth.