eSUN PLA-GF Filament eSUN PLA-GF Filament 1.75mm 1000g Natural

The glass fiber reinforced pla filament ePLA-GF is developed on the basis of PLA is added with 16% glass fiber, which greatly enhances the rigidity and impact resistance of ordinary PLA. The ePLA-GF’s bending modulus is as high as 4400MPa, which is highly rigid and not easy to distort.

Description

High impact resistance and good printability of PLA; Suitable for mechanical parts prototypes with requirements for rigidity and impact resistance; Wear-resistant performance makes it suitable for printing gears and can be used as temporary functional parts.

Filament Properties Table3D PRINTING FILAMENTePLA-GFDensity(g/cm3)1.31Heat Distortion Temp(℃,0.45MPa)56 5/10Melt Flow Index(g/10min)6.36（190℃/2.16kg）Tensile Strength(MPa)59.27 7/10Elongation at Break(%)7.99 1/10Flexural Strength(MPa)85.01 8/10Flexural Modulus(MPa)4414.89 8/10IZOD Impact Strength(kJ/㎡)10.16 2/10Durability4/10Printability9/10Recommended printing parametersExtruder Temperature(℃)190 – 230℃ Recommended temperature：215℃Bed temperature(℃) 45 – 60°CFan Speed 100%Printing Speed 40 – 100mm/sHeated Bed OptionalRecommended Build SurfacesMasking paper, PVP solid glue, PEI