ETCR-1860 High Voltage Detector 1 kV-500 kV, Wrist Alarm, for Electrical Maintenance

General Description

The ETCR-1860 high-voltage detector is an essential device for ensuring operator safety during electrical operations.

It uses non-contact detection technology to provide an accurate and reliable alarm, thus guaranteeing optimal protection against electrical hazards.

With a standby time of up to 12 months, this device is designed for durable and effective use in various industrial, railway, and electrical environments.

Technical Specifications

Item Type: High-Voltage Detector

Material: ABS Voltage Range: 1 kV - 500 kV Alarm Distance: 1 kV: 0.1 m 6.6 kV: 0.6 m 10 kV: 0.8 m 35 kV: 1.3 m 66 kV: 1.8 m 110 kV: 2.2 m 220 kV: 3.0 m 330 kV: 3.6 m 500 kV: 4.2 m Power supply: 1 XCR1632 button cell battery (not included) Distance error: ±10 cm (at 23 ℃ ±1 ℃, 80% RH) Operating frequency: 50/60 Hz Test mode: non-contact Detection mode: automatic triggering Battery life: approximately 24 hours continuous operation, approximately 12 months standby Protection rating: IP54 Working environment: -10 ℃ to 40 ℃, less than 80% RH Storage environment: -10 ℃ to 60 ℃, less than 70% RH

Usage

Wear the alarm on bare wrist skin, keeping the casing close to the skin. Make sure the triangular symbol on the surface of the alarm point is pointing towards your fingertips.

This alarm is not a replacement for a voltage detector and should not be used as one. In case of rain, remove the battery and allow it to air dry.

Do not use the alarm in a wet condition, as this can significantly reduce its range. If the alarm is damaged, check its condition and perform a functional test.

Read the manual carefully after purchase for proper use.

Other Information

Package List:

1 x High Voltage Detector (battery not included), 1 x Manual, 1 x Button.