ETCR-1860 High Voltage Detector 1 kV-500 kV, Wrist Alarm, for Electrical Maintenance

General Description

The ETCR-1860 high-voltage detector is an essential device for ensuring operator safety during electrical operations. It uses non-contact detection technology to provide an accurate and reliable alarm, thus guaranteeing optimal protection against electrical hazards. With a standby time of up to 12 months, this device is designed for durable and efficient use in a variety of industrial, railway, and electrical environments.

Technical Specifications

• Item Type: High Voltage Detector
• Material: ABS
• Voltage Range: 1 kV - 500 kV
• Alarm Distance:
  • 1 kV: 0.1 m
  • 6.6 kV: 0.6 m
  • 10 kV: 0.8 m
  • 35 kV: 1.3 m
  • 66 kV: 1.8 m
  • 110 kV: 2.2 m
  • 220 kV: 3.0 m
  • 330 kV: 3.6 m
  • 500 kV: 4.2 m
  • m
• Power supply: 1 x XCR1632 button cell battery (not included)
• Distance error: ±10 cm (at 23°C ±1°C, 80% RH)
• Operating frequency: 50/60 Hz
• Test mode: Non-contact
• Detection mode: Automatic triggering
• Battery life: Approximately 24 hours continuous operation, approximately 12 months standby
• Protection rating: IP54
• Operating environment: -10°C to 40°C, less than 80% RH
• Storage environment: -10°C to 60°C, less than 70% RH

Usage

• Wear the alarm on bare skin on the wrist, keeping the casing close to the skin.
• Make sure the triangular symbol on the surface of the alarm point is pointing towards your fingertips.
• This alarm is not a substitute for a voltage detector and should not be used as one.
• In case of rain, remove the battery and allow it to air dry.
• Do not use the alarm in a wet condition, as this can significantly reduce its range.
• If the alarm is damaged, check its condition and perform a functional test.
• Read the manual carefully after purchase for proper use.

Other Information

• Package List: 1 x High Voltage Detector (battery not included), 1 x Manual, 1 x Button Part.