EU Wireless Switch Without Batteries Pack of 1 Self-Powered Wireless Switch Kit Wireless Two-Way Switch Without Battery Radio Remote Switch Home Lighting (EU 1Gang 1V1 A)

1. A self-powered wireless switch that requires no batteries. When there is no battery or Wi-Fi, tap the panel to convert the kinetic energy of your finger into electrical energy and send a 433 MHz wireless signal to the receiver to turn the lights on or off.

2. Easy to install, the panel requires no rewiring. Simply connect the receiver to the phase and neutral wires of the desired light and press the panel to turn the light on and off. The product code is identical to the factory code, avoiding any code confusion; so you can use it directly!

3. A self-powered wireless switch with strong RF signals, capable of transmitting strong RF signals through walls and doors to control light fixtures within approximately 50 meters indoors (150 meters outdoors).It is ideal for controlling lights in homes, garages, outdoor lighting and gardens. (Cannot be installed inside a metal box because the metal will shield the signals and cannot be used!)

4, DIY your wireless light switch system, which can control one receiver with multiple switch panels, such as up and down stairs, entryway and bedside, requires multiple switch panels to control the lighting scene. Different wireless light switch kits will not interfere with each other or cross paths.Can create a perfect home lighting control system.

5, Waterproof self-powered wireless light switch, due to the milliampere level of electricity output from the switch panel, there will be no circuit break, and it can be used even in humid environments such as bathrooms and courtyards. Simply press the switch panel to remotely turn on/off indoor lighting equipment, ceiling lights, plug-in chandeliers, fixtures, hard-to-reach lights and other devices.

6, Wide voltage receiver: AC100-230V (can be used in most countries around the world), small receivers can be easily installed in control boxes such as ceiling lights, switch boxes and junction boxes. Rated power: 10A. Self-powered wireless switch that does not require a battery.In the absence of battery or Wi-Fi, you can press the switch panel to convert the kinetic energy of finger pressure into electrical energy and send a 433MHz wireless signal to the receiver to turn the lights on or off. 2. Easy to install, the switch panel does not need to be rewired. Simply connect the receiver to the hot and neutral wires of the desired lamp and press the switch panel to turn the light on and off. We have compared the product code with the factory outlet, and there will be no code confusion, so you can use it directly. 3. 230 V wireless switch without battery 1. Self-powered wireless switch that does not require a battery.In the absence of battery or Wi-Fi, you can press the switch panel to convert the kinetic energy of finger pressure into electrical energy and send a 433MHz wireless signal to the receiver to turn the lights on or off. 2. Easy to install, the switch panel does not need to be rewired. Simply connect the receiver to the phase and neutral wires of the desired lamp, then press the switch panel to turn the light on and off. We have compared the product codes with factory delivery, avoiding confusion, so you can use it directly.

230V wireless switch without battery: 1. Self-powered wireless switch without battery.In the absence of battery or Wi-Fi, press the switch panel to convert the kinetic energy of finger pressure into electrical energy and send a 433 MHz wireless signal to the receiver to turn the light on or off.

2. Easy to install, the switch panel does not need to be rewired. Simply connect the receiver to the phase and neutral wires of the desired lamp, then press the switch panel to turn the light on and off. We have compared the product codes to the factory, avoiding any confusion, so you can use it directly.