Evo-Stik Epoxy Rapid Adhesive - Fast-Setting 5-Minute Two 15ml Tubes (Model EVO30613667)

Description

• This is a high-performance, fast-setting epoxy adhesive suitable for bonding a wide range of materials including metal, wood, ceramics, glass, plastics, and more. It provides a strong, waterproof bond that can be shaped, sanded, drilled, and painted after curing. Ideal for DIY repairs and assembly projects, it offers excellent chemical and oil resistance and sets hard within minutes.

Technical Specifications

• Type: General adhesive
• Application: Internal use
• Drying time: Sets in approximately 10 minutes at 20°C, fully cures in 12 hours
• Temperature resistance: -20°C to +70°C
• Pack includes: 15ml resin, 15ml hardener, mixing spatula, and tray

Compatibility and Accessories

• Suitable for bonding metals, ceramics, glass, wood, dry concrete, rubber, fabrics, crystal, jewelry, precious stones, and hard plastics
• Can be drilled, sanded, machined, and painted once fully cured

Installation

• Ensure surfaces are clean, dry, and free from dust, rust, grease, or flaking material
• Roughen surfaces with sandpaper to improve adhesion
• Mix equal parts of resin and hardener thoroughly for 30 seconds to 1 minute
• Apply immediately to both surfaces and press together
• Hold or clamp until the adhesive begins to cure
• Work in small quantities, as mixed adhesive is usable for only about 4 minutes

Usage

• Apply to clean, prepared surfaces and assemble promptly
• Allow curing time for full strength
• Adhesive sets faster at higher temperatures and slower at lower temperatures

Other Information

• Residual adhesive can be removed with a sharp knife before it sets