EW-802AC220V LCD Thermostat for Solar Water Heaters - Digital Thermostat Temperature Regulator - Precision Calibration Accessory

1. Digital solar water heater thermostat; it can be used for cooling and heating incubators and is easy to install and use. 2. It is mainly used in solar water heating equipment, using the temperature difference and temperature to control the output. 3. Controls the water valve to automatically add water when the water level is low and automatically stops adding water. 4. When the temperature difference reaches the set value, the water pump cycle automatically runs to regulate the temperature in both temperature zones. 5. Controls the electric heating. When the solar heating system's temperature difference falls below the set temperature, the electric heating system automatically starts heating to maintain the set temperature and automatically adjusts the temperature within the temperature difference control range. Specification: Condition: 100% Brand New Item Type: Thermostat Material: ABS Operating Voltage: AC220V ±10% 50HZ/60HZ Output Load: 5A/220V/AC X3 Power Consumption: ≤3W Working Environment Temperature: -10℃-50℃ RH≤90% Heating Control Range: 2℃-99℃ Temperature Difference Start Control: 3℃-50℃ Resolution: 1℃ Accuracy: ±1℃ Input Signal: Bidirectional Sensor: 20KX1.5mX2 Size: Approx. 88x72x54mm / 3.5x2.8x2.1in Package List: 1 x Thermostat 2 x Sensor with Wire Note: 1. Please allow 0-1 inch error due to manual measurement. Thank you for your understanding. 2. Monitors are not calibrated the same way, so the color of the item shown in the photos may be slightly different from the actual object. Please consider the actual item as the standard. https://m.media-amazon.com/images/I/61XEuZEcXuL.jpg