External NVMe SSD Enclosure with USB-C 3.1, 10 Gbps Read/Write Adapter for M.2 Drives

Transform your M.2 NVMe SSD into an ultra-fast portable hard drive with our external enclosure! This enclosure is essentially an adapter that allows you to install your small internal M.2 NVMe SSD and then connect it to your computer, phone, or other device via a Type-C/USB cable. Ideal if you have an extra M.2 NVMe SSD! Install it in this enclosure to take it everywhere with you, expand your computer's storage capacity, and transfer files at incredible speeds, up to 10 Gbps (approximately 1 GB per second).

**Main Function:**

Convert an M.2 SSD into a portable hard drive for external use.

**Compatibility:**

Supports M.2 SSDs using the NVMe protocol (M and B+M keys).

Compatible with sizes: 2230 / 2242 / 2260 / 2280 / 22110.

**Does NOT support** SSDs using SATA or mSATA protocols.

**Transfer Speed:**

Up to 10 Gbps (USB 3.2 Gen2 specification), with read/write speeds of up to Reaching speeds of approximately 1000 MB/s.

**Product Configuration:**

Interface: Type-C.

Includes two cables: one Type-C to Type-C cable and one Type-C to USB-A cable.

**Important Note:** The SSD is **NOT** included.

**Design and Dimensions:**

Exterior: Black carbon fiber structured casing with non-slip silicone pads on the bottom and ventilation vents on the sides.

Approximate Dimensions: About 5 cm (Length) × 6.7 cm (Width) × 1.5 cm (Height).

**Supported Operating Systems:**

Compatible with Windows, Mac OS, Linux, and Android.

**Package Contents:**

1 x External M.2 SSD Enclosure.

Package Dimensions: 11.5 cm x 10 cm x 1.7 cm.

**Additional Information:**

Due to different production batches, the product you receive may have slight variations in appearance, which will not affect its use. Manual measurements may contain minor errors.