Faithfull ATS6961 4-Piece Sheet Metal Butt Welding Clamps for Precise Metal Joining

Description

• These Faithfull Butt Welding Clamps are essential tools for aligning sheet metal panels edge-to-edge and surface-to-surface. They help maintain the correct gap for producing clean welds with minimal grinding afterward. The clamps are easy to use for assembling and fabricating, making them ideal for welding patch repairs in floors, wings, door skins, or fabricating panels during reskinning projects. They can hold flat, curved, and pressed ribbed panels securely.

Specifications

• Number of pieces: 4
• Suitable for sheet metal panels
• Adjustable wing nut for clamping pressure

Compatibility and Accessories

• Compatible with various sheet metal panels used in automotive and metalwork repairs
• No additional accessories required for basic operation

Installation

• Loosen the wing nut to allow space for the metal sheets to be positioned between the base of the clamp and the toggle bar underneath.
• Adjust the position of the sheets and tighten the wing nut to lock the sheets together side by side.
• Once the sheets are tack welded, loosen the wing nut and remove the toggle bar. The clamp can then be lifted from the workpiece before final welding.

Usage

• Use the clamps to hold metal sheets in proper alignment during welding or fabrication.
• Adjust the wing nut to apply the necessary pressure for secure holding.
• Remove the clamps after tack welding and before final welding to ensure a clean finish.