1/5

Faucet and Rain Barrel Connector Kit, Brass Quarter Turn Ball Valve with Bulkhead Fitting and Two 13" Hose and Four Bulkhead Tank Fittings

Product information

Description

General description

Collect and conserve rainwater with the Faucet and Rain Barrel Connector Kit. This kit is designed for irrigation systems using rain barrels, allowing you to reduce your water bill and utilize eco-friendly methods for watering plants and performing outdoor tasks. It includes a brass quarter turn ball valve, bulkhead fittings, and two 13' hoses to connect multiple rain barrels.

Technical specifications

Material: PVC, Brass

Length of connection pipe: 12 inches

Weight: 255g

Wall thickness compatibility: Suitable for walls up to 1.3 inches (33 mm) thick

Required hole diameter for installation: 1 inch (27 mm)

Installation

Step 1: Drill a 1-inch hole.

Step 2: Place the male part of the connection from the inside.

Step 3: Attach the fitting from the outside.

Step 4: Tighten the nut.

Step 5: Wrap with tape.

Step 6: Tighten the faucet clockwise.

Two installation methods: brass plate fittings for front or rear installation.

Usage

The kit is ideal for connecting two rain barrels, enhancing your rainwater collection capacity, especially useful during dry seasons.

Other information

Brass Rain Barrel and Rain Barrel Fittings Set

Features

Brand
COOCHEER
Length
33 cm
Width
2 cm
Height
3 cm
Weight
255 g

Advice from

Water butt buying guide

Cost-effective, environmentally friendly and easy to install, water butts offer a practical solution for anyone hoping to water their garden without increasing their water bill. Designed to be connected to a downpipe, water butts and underground water tanks can range from 300 to 5000 litres in capacity.

Read our guide

You are here: