You may also like
Compare with similar items
Product information
Description
Features
Almost indestructible. Ideal for flexible and universal use with sheet thickness up to 1.6 mm..
Optimum ergonomics with a handle up to 20% slimmer because of its extremely thin drive head.
Cutting direction setting can be changed in 45° steps up to 360° using tool-free pivoting cutting head.
QuickIN clamping system.
High cutting speed.
Rotating punch for a service life which is now up to 30 % longer.
Low operating costs due to long tool life of punch and die.
Motor with outstanding performance and stability.
Chip protection mesh on vent slots.
5 metre cable.
Stainless steel up to 0.7 mm.
Retrofittable trapezoid profile set up to 160 mm deep channels.
Specification
Standard Equipment
Warranty
Almost indestructible. Ideal for flexible and universal use with sheet thickness up to 1.6 mm..
Optimum ergonomics with a handle up to 20% slimmer because of its extremely thin drive head.
Cutting direction setting can be changed in 45° steps up to 360° using tool-free pivoting cutting head.
QuickIN clamping system.
High cutting speed.
Rotating punch for a service life which is now up to 30 % longer.
Low operating costs due to long tool life of punch and die.
Motor with outstanding performance and stability.
Chip protection mesh on vent slots.
5 metre cable.
Stainless steel up to 0.7 mm.
Retrofittable trapezoid profile set up to 160 mm deep channels.
Specification
Input 350 W
Output 210 W
Strokes 800 - 1,500 rpm
Cutting speed 1.9m/min
Steel up to 400 N/mm² 1.6 mm
Steel up to 600 N/mm² 1 mm
Steel up to 800 N/mm² 0.7 mm
Non-ferrous metals up to 250 N/mm² 2.5 mm
Cutting width 5 mm
Immersion Ø with die 22 mm
Rad. of smallest curve (inside/outside) 30 / 35 mm
Cable with plug 5 m
Weight according to EPTA 1.80 kg
Standard Equipment
1x punch (6 36 02 050 00 0)
1x die for trapezoidal sheet metal (3 01 09 170 00 1)
Warranty
click above logo to register your new FEIN product within 6 weeksafter purchasefor the 3-year FEIN PLUS warranty.
Features
- BrandFEIN
- Voltage110 V
- MaterialMetal
- Power sourceCorded
- Suitable forMetal
Advice from
Nibbler buying guide
A nibbler literally devours steel and is used mostly in sheet metal and bodywork. It is also used to to cut steel tanks or any metal, be it steel or stainless steel thin. The punch determines the cutting width, while the cutting rate dictates the feed rate. Nibblers can be either electric or pneumatic - operated with a compressor.
'/%3E%3C/svg%3E)
Visit the FEIN storeEIN, more precisely C. E. Fein Gmbh, is a German company founded in 1867 in Schwäbisch Gmünd, southwest Germany. In that year, Guillaume (Wilhelm) Fein set up his own workshop to manufacture electrotechnical tools. This inventor even proposed a telephone model a few months after Bell, in 1877; but he succeeded in imposing his standard, the horseshoe magnet, which offered better transmission quality. In 1895, he developed the portable electric drill, followed a few years later by pistol-shaped electric drills. Then came the portable electric sander. In 1914, Fein had the idea of combining electricity and air power to transform the rotary motion of the electric motor into straight-line percussive motion: he invented the Fein percussion machine, i.e. the first chipping hammer. In the 50s, another innovation was launched: power tools made of plastic, an insulating material. The Fein catalog continued to grow: angle grinders, nibblers, jigsaws, bolt cutters... all adorned with the brand's orange color. Fein holds over 800 patents and rights. The company continues to manufacture in Germany, where 60% of its employees are based.
You are here:
'/%3E%3C/svg%3E){kind=small}