Filetage 2cm Lampe Tige Filetée Trousse avec Écrous Blocage Rondelles, Attaches Assortiment Matériel pour Lustre Plafond Luminaire Bricolage, Placage Zinc

This kit will come with nuts, washers, and threaded lamp tubes. The nuts are used to secure the lamp tubes, and the flat washers distribute the load on the threaded tubes, providing a smooth surface. It is primarily used for repairing or replacing chandeliers, ceiling lights, or for DIY projects. Specification Material: Carbon Steel Surface Treatment: Zinc Plating Thread Size: 1/8IP Lamp Tube Size: 7mm x 20mm / 0.28" x 0.79" (ID Length) Nut Size: 4mm x 14mm / 0.16" x 0.55" (TW) Flat Washer Size: 10mm x 20mm / 0.39" x 0.79" (IDOD) Toothed Washer Size: 10mm x 17mm / 0.39" x 0.67" (IDOD) Package Includes: Lamp tube, nut, flat washer, toothed washer, lamp tube insert plug (black, plastic) Advantage 1. This kit includes the threaded tube, nut, and washers. 2. The threaded lamp tube has a hollow center that allows the thread to pass through. In addition, the rear insert cap can be installed over the hole to protect the wire from abrasion. Instructions: 1. Before screwing the nuts onto the threaded lamp tube, first install the washers. 2. The black caps can be inserted into both ends of the lamp tubes to protect your electrical wire. NOTE: Please confirm the thread size.