Film tint reflective for window, effect mirror, 90 x 100 cm

Protection of the privacy in day - This film reflective for window offers a excellent privacy in day, car the glass outdoor creates a effect mirror when the light outdoor is more intense that the light indoor. Note : the night, the effect mirror is reversed and the indoor is visible of the outdoor ; pensez therefore to pull the curtains.

Easy to install - This film sticker for window, equipped of a glue fine, is very easy to install and to remove. It enough of use many of water on the surfaces vitrees for the stick. It enleve easily in decollant the film by a corner and in pulverisant abondamment to the water. It not let no residue and damages not the glass.

Blocking UV - Blocks 95 % of rays ultraviolet harmful and attenue the rays of the sun. Protects your skin and you allows of enjoy of the sun in all mind. Prevents also the fading of the furniture.

Insulation thermal - This film thermorégulateur for window you fender to the warm in winter and blocks the heat in summer.

Many applications - Suitable to the offices, rooms of sport, home, centers commercial, apartments in location, etc.

Features :

The film solar for window is a genuine advantage : it preserve your privacy, protects of the heat in summer and of the cold in winter, attenue the glare of the sun, regulators the heat and reduces the temperature, and you allows of reduce your invoices of electricity.

Same with a large baie glazed, our film mirror for window you offrira a atmosphere warm. From that the sun between, you ressentirez the cruauté of rays UV. It is therefore important of itself prepare to l'ombre.

Recommended installation :

Steps 1. Now the window or the glass clean.

Steps 2. Vaporisez of water on the window or the glass.

Steps 3. Remove the film static of the sheet of protection (sure of l'have removed front rural the film on the glass).

Steps 4. After the installation, appliquez the film on the glass wet and lissez by hand.

Steps 5. Reinitialisez the bubbles air and l'excedent water with a squeegee.

Steps 6. For the remove, peel simply the film by any corner. Itself decolle cleanly and without leave of residue.

Recommended utility :

Before of stick, pensez to remove the film protector and to spraying abondamment to the water.

Use a watering for spraying davantage of water on the glass and the surface of the film (more it y has of water, better this is). Grattez the bubbles of air with a squeegee.

Lettrages the film to 2 mm of the frame of the window, prenez a corner, vaporisez to new, stick and grattez the bubbles.

Content :

A roll of film for window

1 manual of use