Fireplace Insert Gasket, Heat Resistant Self-Adhesive Braided Gaskets for Stove and Fireplace (3mm x 25mm x 2.5m)

• ✅【Joint Size】 Thickness x Width x Length. This is the meaning of our style name numbers. Please select Braided Gasket Sealant according to this data.
• ✅【Easy to use】 LANUCN gasket is self-adhesive. It is covered with a layer of double-sided heat-resistant adhesive tape, easy to apply without adding other adhesives. Clean and dry the surface, peel off the protective film, stick it, wait 12 hours, done!
• ✅【Upgraded Durable + Airtight Performance】Benefit from the fiberglass rope material and craftsmanship improvements, LANUCN stove glass gasket is tested up to temperatures of 600°C heat-resistant and no leakage of smoke.
• ✅【Widely Application】 Almost all smokers and ovens can use it, such as stoves, ovens, fireplaces, grills, smokers, tube stove, chimney, etc.
• ✅【Important】 1.The temperature of direct fire is much higher than 600°C, so don't let it directly touch the fire or be over 600°C. 2. When used on vertical facade, a component to fix the seal rope is required, otherwise additional joint adhesive should be added for reinforcement.

Product Description

LANUCN Seal Insert Chimney

After a long time of using the chimney, the chimney door seal will have the problem of smoke leakage more or less.Here is our solution for this, quick and easy.


Features:

Improve craftsmanship, no smoke leakage.

Self-adhesive, easy to use.

600℃ extreme durability.

Long time service.


Scope of application:

Almost all fireplaces and ovens can use it, such as stoves, ovens, fireplaces, grills, wood stove, smoke pipes, chimney, etc.


Instructions:

1.Clean and dry the surface.

2.Peel off the protective film.

3.Stick it to the right place, wait 12 hours.

4.That's it!


Important tips:

1. The temperature of direct fire is much higher than 600°C, so don't let it directly touch the fire or be over 600°C.

2.When used on a vertical facade, a component to secure the sealing rope is required, otherwise additional joint adhesive must be added for reinforcement.