Fitting of tank S60X6 - Faucet in brass chrome 15 mm + nozzle 20x27 - Faucet of tank of recovery of water RWR

This coupler itself connect directly on the valve of the tank of 1000 liters (requires a thread S60X6) and allows of connect the hose of watering to the faucet. the end before of the faucet not can not be dévissée. The nose itself visse on the output gas

male 3/4'.

Practical : Tighten the spout in brass 3/4' Gardena for raccorder the hose of watering to the faucet.

Features:

Material : polypropylene and brass chrome

Input : scotchée (female) S60X6

Output : Valve to boisseau spherical in brass chrome with tip non vissable of 15 mm (output male 3/4", not of gas) and aerator of jet in plastic white removable for more than flow + tip of valve in brass additional of 20x27 mm

Weight : 331 grammes

all new

+Accessories tank of water S60X6 ? Faucet Brass Chrome 15mm + Fitting Faucet Brass 20x27 (Garden Male 15mm)

Be prudent when you screw the cap in plastic on the part in brass in order to not damage your fitting.

My valve of tank must be to the format S60X6 thread S60X6

Also called wire of artillerie, the wire S60X6 the more repandu in France.

D1 = Diameter outdoor of output of valve (threading including) : between 58 and 61 mm

P1 = not of mesh : 6 mm

Number of threading of valve : between 3 and 4.

If your valve is equipped of a valve integrated (type valve WERIT), you devrez install a extension of thread S60X6 between the valve and the fitting To prevent that the valve not blocks its tightening.

If your valve has of other threading, please consulter our page of threading. In case of doute, please we contact by e-mail with of photos of face and 3/4 of your valve.

not suitable not to the valve to cam

you informe that this item not wall light not to the valve to cam (see here-against).

The number of nets on the valve to cam is insuffisant and not allows not a fastening waterproof of the fitting.