FLITI10A RF Wireless Wall Switch – Receiver + 2 remote controls for lamps up to 1500W, simplified installation
Buying for your business?
Negotiated prices excl. VAT up to -20%
Product information
Description
- 【Outstanding Design】 433 MHz wireless switch. No wiring is required between the light and the switch. Stable and reliable performance with high receiving sensitivity (> -97 dBm). Wireless signal transmission. A strong signal penetrates walls, floors, doors, panels, etc. Control is possible in open spaces up to a distance of 50 meters.
- 【Easy to Use】 The wireless switch can be attached using double-sided tape or screws. You can turn the device on and off remotely using the wireless switch. It is a standard Type 86 switch. [Easy Installation] The mini receiver measures 47 x 42 x 23 mm. It is installed between the power supply and the device. It easily conceals itself in most electrical boxes or junction boxes, or attaches to the circuit board using screws. Installation is simple and allows you to control lights or outlets. No wiring is required. [Multiplayer Control] Each receiver can memorize up to 10 wireless switches. This allows you to share switches with your family. Each person can remotely control the device associated with their receiver. A single transmitter can also control multiple receivers. For example, one wall switch near the bedroom door and another on the bedside table. [Quality Guarantee] High-quality relay with a lifespan of over 400,000 switching cycles. The receiver uses a 10-amp relay and can handle high-power electrical devices. It is compatible with AC voltages from 85V to 250V, and therefore works with 110V, 220V, and 230V. 【High-Quality Switch】 The wireless switch is designed for over 500,000 switching cycles. A 12V, 27Ah battery is required. The battery life is approximately 5 years. The battery can be replaced after removal. 【More Flexibility】 Extremely easy installation and reset. You can easily add more wireless switches if needed.
Product Description
| | | |
|---|---|---|
Powerful 433 MHz Radio SignalThe DieseRC wireless radio switch uses 433 MHz radio technology and has a powerful signal that penetrates walls, floors, and doors. The built-in EV1527 code chip allows for system programming and customization. You can control any device connected to the relay receiver via the wireless switch from anywhere within the coverage area. Simple to use: No wiring is required between the light fixtures, the traditional switch, and the power supply. You can easily control the light connected to the controller via the wireless switch. There is no need to cut cables in the wall. The wireless switch can be placed anywhere as needed. | Wide range of applicationsThese products can be used in homes, farms, factories, offices, laboratories, supermarkets, etc. Wireless remote control applications range from simple home remote controls to the automation of lighting, water pumps, water heaters, wireless alarm systems, ventilation systems, fans, lamps, wireless door alarms, monitors, printers, fountains, and other electrical appliances, etc. |
 | Product SpecificationsThis RC Radio Switch
|
 |  |
ProgrammingPress the button on the wireless switch; the light will turn on. Press the button again to turn the light off. Programming
| ResetPress the learning button (on the receiver) 8 times. Success.
Notice:After resetting, no wireless switch can control this receiver. |
Features
- BrandFLITI
- ColourWhite
- MaterialPlastic
- Weight300 g
- Wireless communication protocolRF 433/868 MHz
- ManoMano ReferenceME270548952
- MMID384069939648
- Product codeZFB-UK-1924
- EAN6110007612879
'/%3E%3C/svg%3E){kind=small}