Flood barrier threshold, indoor folding door strip, shower wall, bathtub, dry and wet separation, suitable for kitchen and bathroom (100 cm, white)

Foldable and waterproof: The self-adhesive sealing strip of the dam body is placed firmly to prevent water from flowing out. It is waterproof and foldable. It can be folded flexibly according to the shape of your furniture to form a small dam

waterproof, providing a good water blocking effect. The appearance of the shower head is white, which adapts perfectly to the environment.

Advanced materials: The shower threshold dam is made of high quality TPE, healthy and environmentally friendly, waterproof, mold resistant and does not deform. Separate the dry and wet. You can easily cut it to

the desired length and the water retaining tape is flexible enough to create different shapes.

Soft and harmless: The waterproof strap is soft and will not hurt your feet, so hitting it can ensure your safety and that of your family. The surface is easy to clean, just wipe it with a damp cloth and it will be like

new.

Easy to install: 1. Wipe the floor with a cloth. 2. Highlight the location. 3. Remove the primer and stick the water retention strip according to the marked position. 4. Push the water locking lever into place. 5. Stretch the

water retention strips at both ends and stick them on both sides. 6. Leave it for 24 hours.

Usage function: The water stop strip has the ability to stop water and is suitable for bathrooms, kitchens and sinks. It is waterproof and dustproof, forming a wet and dry separation protection to ensure that

your floor is dry and clean in this way, while ensuring the safety of your family, it can also be used flat under smooth wooden or glass doors.

shower seal

- Easy to cut: create different shapes to fit your bathtub or kitchen sink.

-Ideal for showers without curves and other areas where water needs to be contained: under shower curtains, next to shower trays, bathroom thresholds, countertop sinks, washing machines, sinks.

Specification:

Color: white, black, gray, transparent

Material: TPE

Length: 100 cm

Installation steps:

First, clean the floor thoroughly and keep it dry. This step is very important!

Then determine the installation position of the water retention strip, then mark it on the floor with a pen.

Peel off the adhesive tape on the back of the waterproof strip and stick it to the floor in the previously marked location.

Finally, to avoid falling, please dry it within 24 hours and avoid contact with water.

Note: Clean the surface thoroughly and make sure it is dry before installation, then remove all existing water seals. Please use a hair dryer to heat the glue before use to obtain a better effect

bonding.

[Special reminder] The water blocking tape can be used with glass glue. Apply glue to both sides of the waterproof barrier and spread it evenly. If both sides and ends are fixed with glass glue,

its lifespan can be extended.