Flood-proof threshold strip, interior folding door strip, shower wall, bathtub, wet and dry separation, suitable for kitchen and bathroom (100 cm, white)

Flexible and Waterproof: The self-adhesive sealing strip on the body of the dam is firmly positioned to prevent water from leaking out. It is waterproof and flexible. It can be bent to fit the shape of your furniture to form a small, watertight barrier, providing a good water-blocking effect. The shower head has a white finish that blends perfectly into the environment. Advanced Materials: The shower threshold dam is made of high-quality TPE, which is healthy and environmentally friendly, waterproof, mildew-resistant, and won't deform. It separates wet and dry water. You can easily cut it to the desired length, and the water-retaining strip is flexible enough to create different shapes. Soft and Harmless: The waterproof strap is soft and won't hurt your feet, so hitting it ensures your safety and that of your family. The surface is easy to clean; simply wipe it with a damp cloth and it will be like new. Easy to install: 1. Wipe the floor with a cloth. 2. Highlight the location. 3. Remove the primer and stick the water-retaining strip according to the marked position. 4. Push the water-locking lever into place. 5. Stretch the water-retaining strips at both ends and stick them on both sides. 6. Leave it for 24 hours. Function: The water-stopping strip has the ability to stop water and is suitable for bathrooms, kitchens, and sinks. It is waterproof and dustproof, forming a wet/dry separation barrier to ensure your floor stays dry and clean, keeping your family safe. It can also be used flat under smooth wooden or glass doors. Shower seal - Easy to cut: create different shapes to fit your bathtub or kitchen sink. - Ideal for showers without curves and other areas where water needs to be contained: under shower curtains, next to shower trays, bathroom thresholds, countertop sinks, washing machines, washbasins. Specification: Color: white, black, gray, transparent Material: TPE Length: 100 cm Installation steps: First, thoroughly clean the floor and keep it dry. This step is very important! Next, determine the installation position of the water-retaining strip and mark it on the floor with a pen. Peel off the adhesive backing of the waterproof strip and stick it to the floor in the previously marked location. Finally, to prevent it from falling, please allow it to dry for 24 hours and avoid any contact with water. Note: Thoroughly clean the surface and ensure it is dry before installation, then remove any existing water seals. Please use a hairdryer to heat the adhesive before use for better bonding. [Special Reminder] The water-blocking strip can be used with glass adhesive. Apply adhesive to both sides of the waterproof barrier and spread it evenly. If both sides and the ends are fixed with glass adhesive, its lifespan can be extended.