Fockety Adjustable Delay Cycle Timer Module for Repetitive Machine Test Circuit DC 5V/12V/24V 0-15 Min/0-60 Min Timer Relay Module for Alternative Stroke Control

1. This is a time-delay relay module with high, stable, and reliable performance. 2. It supports two modes: single-phase and cyclic. The mode can be easily switched by adjusting the jumper. 3. A wide time range can be set, both for the on and off times. 4. It is ideal for controlling back-and-forth movements or repetitive on/off cycles for equipment and product burn-in testing. 5. Widely used in timer control equipment, repetitive machine test circuits, intermittent aquarium pumps, etc.

Specification: Features: This is a time-delay relay module with high, stable, and reliable performance. It supports two modes: single-phase and cyclic. The mode can be easily switched by adjusting the jumper.

There are several voltage and time ranges to choose from, and the activation and deactivation times are adjustable. It is ideal for controlling back-and-forth movements or repetitive on/off cycles for burn-in testing equipment and products. Widely used in timer control equipment, repetitive machine test circuits, intermittent aquarium pumps, etc. Technical data: Type: DC5V, 0-15 min / DC5V, 0-60 min / DC12V, 0-15 min / DC12V, 0-60 min / DC24V, 0-15 min / DC24V, 0-60 min (optional). Load capacity: 10A 250VAC, 10A 30VDC Size: 70*20mm/2.75*0.78" Time delay: T1 (relay activation delay), T2 (relay deactivation delay) Single mode (jumper OP3): 1. The module powers on. After activation, the relay turns on, a T1 delay occurs, and the relay is deactivated. 2. Once the delay process has started, restarting the module will immediately stop the delay. Cycle mode (jumper OP4): 1. The module powers on. When triggered, the relay turns on, delaying T1, then turns off, delaying T2, and then turns back on. This cycle repeats. T1 and T2 are set by two adjustable resistors, respectively. 2. Once the delay process has started, restarting the module will immediately stop the delay. How to quickly set the time: The time can be quickly set by measuring the voltage. (Uc) of the resistance. Let's take the example of a 5V 15 min module. If Uc=2V, time=2V/5V*15min=6min. The package includes: 1 x timer relay module