Foldable shower barrier 2M – Silicone insulation seal – Width 20mm – Self-adhesive installation for bathroom and kitchen

General Description

The Ahlsen Folding Shower Barrier is designed to create an effective separation between wet and dry areas in your home. It can be used on various surfaces such as shower floors, shower trays, kitchen sinks, under bathroom doors, around bathtubs, as well as near washing machines and toilets.Made from food grade organic silicone, this barrier is resistant to corrosion, high temperatures and wear, while being odorless.

Technical specifications

• Height: 12 mm
• Width: 20 mm

Installation

To install the barrier, follow these steps:

• Clean and dry the surface where you wish to apply the barrier.
• Cut the silicone water barrier strip to the desired length.
• Remove the pre-adhesive tape and stick the barrier to the smooth surface.
• For better adhesion in winter, use a hair dryer to heat the surface.
• At the corners, it is recommended to cut at 45 degrees to ensure a strong connection.

Usage

The barrier is easy to clean with a damp towel.For a better seal, it is recommended to use additional adhesive, such as silicone sealant, to seal the edges of the barrier. Allow to dry for 24 hours for the joints to solidify.

Other information

• Package contents: 1 x sealing strip.
• Color and size variations may exist due to lighting, monitor brightness and manual measurement.

-Contact our customer service in case you need further assistance