1/4
Foldable shower gate with a retaining system to contain water and keep it inside the threshold, in black.
Buying for your business?
Negotiated prices excl. VAT up to -20%
Sold by Qiudie-homelavafans
You may also like
Compare with similar items
Product information
Description
Describe
Dam dimensions: 100 x 3 x 5 cm. It can be easily cut to the length you need.
The long, flexible design creates a variety of shapes.
Shower barriers and retention systems keep water within the threshold.
Ideal for overflow showers and other areas that need to retain water.
If you have any questions about the collapsible barrier, please contact us.
Customer Note: To make the product more stable, please follow the installation instructions for installing the water retention strip.
Installation Steps and Precautions:
(1) First, please thoroughly clean the floor and keep it dry. This step is very important!
(2) Next, determine the installation position of the water retention strip, then make a mark on the ground with a pen.
(3) Peel off the backing from the water-retaining strip and stick it to the floor in the position indicated earlier.
(4) Then fill the area where the two ends of the strip meet the wall with glue, squeeze it in, and remove any excess glue to ensure a smooth seal.
(5) Finally, to prevent it from falling off, please allow it to dry completely within 24 hours and avoid any contact with water.
Dam dimensions: 100 x 3 x 5 cm. It can be easily cut to the length you need.
The long, flexible design creates a variety of shapes.
Shower barriers and retention systems keep water within the threshold.
Ideal for overflow showers and other areas that need to retain water.
If you have any questions about the collapsible barrier, please contact us.
Customer Note: To make the product more stable, please follow the installation instructions for installing the water retention strip.
Installation Steps and Precautions:
(1) First, please thoroughly clean the floor and keep it dry. This step is very important!
(2) Next, determine the installation position of the water retention strip, then make a mark on the ground with a pen.
(3) Peel off the backing from the water-retaining strip and stick it to the floor in the position indicated earlier.
(4) Then fill the area where the two ends of the strip meet the wall with glue, squeeze it in, and remove any excess glue to ensure a smooth seal.
(5) Finally, to prevent it from falling off, please allow it to dry completely within 24 hours and avoid any contact with water.
Features
- BrandOTHERS
- Pcs per pack1
- MaterialPlaster
- Can be cut to sizeYes
- ManoMano ReferenceME242412969
- MMID555780958997
- Product codeQD-GB26Y49295
- EAN5007193892851
You are here:

















