Folding wall bracket 2 pieces, shelf bracket shelf brackets folding bracket metal support garage folding bracket DIY shelf, white 8"/200 mm

[Durable and Sturdy]: This folding shelf is made of high-quality 304 stainless steel with a surface coating that increases corrosion and rust resistance.

[Special Design]: When the shelf is opened, the bracket features a 90-degree triangle that can stably support the weight of objects. When folded, it adheres to the wall like an invisible shelf and takes up no space. You only need to lift one side and gently pull it to fold the board. This is the most perfect function of the folding table.

[Wide Application]: This folding shelf is very useful for daily life, it is ideal for use in shops, workshops, boats, homes, backyards, caravans, bedrooms, kitchens, balconies, bathrooms, etc. It is usually assembled from boards to make shelves and kitchen racks. It's also perfect for hanging bikes, bags, etc.

[Easy Installation]: The wall mount is easy to install and folds up. It's a perfect hardware for your home, garage, office, etc. They can be attached to any type of wall without damaging the texture. You just need to make sure the folding brackets are parallel to each other and perpendicular to the wall.

[Product Size]: 200mm x 165mm x 24mm (Length * Width * Height). The package includes installation accessories: expansion tubes and screws. The package does not include a board. It is recommended that the distance between two brackets does not exceed 60 cm.

● An adjustable table on the wall for your bedroom.

● Use a sturdy folding bracket to build a folding chair on the wall.

● A folding seat near the door for changing shoes.

● The shelf bracket can be mounted on walls of different textures.

●

● Installing these folding brackets is a fun DIY project at home, in the office, and in the study.

Specification:

- Material: Stainless steel, polished coating

- Color: White

- Dimension: 200 * 165 mm / 8 * 6.5 inches

- Maximum load weight: 100 kg

Installation:

- Determine the position on the wall

- Mark the drilling position on the board

- Attach the bracket to the board with short screws

- Drill a hole in the marked wall with a drill

- Insert the expansion tube into the hole

- Attach the bracket with long screws

- Done

S >

Note:

- The diameter of the expansion screw is 0.3 inches, so you should use the same drill size to drill the wall.

- Stay straight during installation and tighten the screws to prevent slipping.

- The short arm of the desk frame is mounted on the wall, and the long arm is used to secure the board.

- It is recommended that the installation distance between two brackets does not exceed 60 cm.

Packaging:

- 2 * Wall Shelf Brackets (1 Pair)

- 6 * Short Screws (2 Spare Screws)

- 4 * Long Screws

- 4 * Expansion Dowels