1/3
Foret diamant pour scie cloche en verre avec foret de positionnement central pour verre, céramique, porcelaine, carrelage 35 mm
Sold by re-green GmbH and 1 other seller
You may also like
Compare with similar items
Product information
Description
General descriptionDiamond drill bit for glass hole saw with central positioning drill for glass, ceramic, porcelain, and tiles, 35 mm. This tool is designed for precise drilling in various materials including stone, tiles, ceramics, and glass. The central positioning drill helps create accurate holes, while the diamond coating ensures a smooth and clean cut without chipping.Technical specificationsDiameter: 35 mmSuitable materials: Stone, tiles, ceramics, glassMaximum drilling depth: Approximately 1.27 cmInstallationWorks best with an electric drill.UsageAlways use water as a coolant during drilling.Drill at low speed and apply low pressure to extend the life of the bit.Not suitable for tempered glass, plastic, wood, or concrete.Other informationDiamond bits with a relief hole facilitate the entry of cooling water and the removal of drilling debris.The white zinc plating on the tips maximizes tool life and provides excellent corrosion resistance.
Features
- BrandTRIMEC
- Width2 cm
- Diameter35 mm
- Weight200 g
- MaterialDiamond
Advice from
Drill buying guide
From hammer drills to drill drivers, your choice of drill will come down to the type of tasks you want to complete. For example, a cordless drill is better for driving screws while a corded drill is best suited to drilling. Read on for our tips on picking the right torque, RPM, impact rate, battery and chuck type.
'/%3E%3C/svg%3E)
You are here:
'/%3E%3C/svg%3E){kind=small}